MarkaSteel Tolerances | |
|
|
If you are making a
frame for our skins its best to get a standard size that is mill cut.
Mill Cut will have the best square ness and dimensional tolerance. Make sure your framing can handle the tolerances stated! |
|
Standard Mill Cuts are |
Repacks and printed skins to left are mill Cut in bulk and have tolerances of +/- .015" or +/- 1/64 These mill sizes are the best price but leave room in your frame design
Custom sizes can be mill cut if willing to wait 4-8 weeks extra and you
need at least 500 pieces |
Hand Cut standard sizes 9x12 2'x2' 4x4 |
The standard sizes
to the left are hand cut and have a tolerance of +/- .188" or +/- 3/16" they will be
hand cut unless its a long lead time time mill
run of 500 + pieces where they will have mill cut tolerance. |
Custom sizes hand cut from Standard Mill Cut pieces |
All custom cuts of
stock sizes unless mill cut on large long lead time run, are hand cut and adhere to a tolerance of +/- 3/16" **hand cuts are much more expensive than standard mill sizes so its best to use a standard when you can ** also
cuts must be a minimum of 1/4" |
Please contact me for further information, samples and pricing. 2/09/2012 |