Easily changeable

18x24 Price
24x36 Price

Back To
All Glass Boards

Changeable Boards

4 ways to mount 18x24

Installation sheet

Video Intro to These

Video Styrene .020 .030
Styrene .040

Video Syntisol insert

Pictures Installed with Insert

Glass is 5/32" (4.0mm) thick which is separated from ..047" white steel panel by .040" (1mm) spacer bars.

see "4 way to mount" links which give you lots of options for Graphic size and position.

The 2 spacer bars decrease the overall size by 3.5"

If graphic insert is to rigid you will need clear wall space to inert it (unless you partially disassemble it).

We recommend .030" styrene which only needs 6" of clearance to insert.  The .030" styrene can also be printed on both sides.

Standoffs are thru the glass and steel and let unit float about an inch off the wall.

Magnetic back also allows it to be used for our markers with our magnetic marker rings.

Glass board require bold ink call us for recommendations like Arteza

*Note: requires ultra-strong neodymium magnets to attach to magnetic backing through the glass.

Ask us about our Magnets for Glass Boards such as WB250H

also see Magnetic Trays   also see All Layout Ideas